Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
Loading...
On the General page, specify the following options:
Template name: Choose and type a template name.
Clone method: Whether to create linked or full clones. A full clone is a complete copy of a template. As such, it occupies as much space on the physical hard drive as the source template and takes a significant time to create. A linked clone is a copy of a template made from a snapshot that shares virtual disk with the source template, therefore it takes much less space on the physical hard drive and it takes only a couple of minutes to create.
You should use full clones if your application and OS updates are too slow (full clones take longer to create, but they provide the best possible performance). Otherwise if your updates are fast enough, use linked clones as it takes much less time to create them.
Note: If the Create a linked clone option is grayed out, it means that the current version or Parallels RAS does not support linked clones with the Provider that you are using. At the time of this writing, support for linked clones is available for VMware, Microsoft Hyper-V, SC//HyperCore, and Nutanix AHV (AOS).
(Microsoft Azure only) Availability set: Select a Microsoft Azure availability set.
On the License Keys page, specify the license key information that will be used to activate virtual machines created from this template.
First, select the license key management type that you are using in your organization (KMS or MAK). Parallels recommend to use KMS because MAK has limited activations.
Key Management Service (KMS): If you are using KMS, click the Finish button to save the template configuration information. Virtual machines that will be created from this template will look for KMS in DNS (at the end of the OS mini-setup and domain joining) and will be activated accordingly.
Note: If you are using KMS activation and RASPrep, the source host must be activated using KMS before you create a template from it. If the host has already been activated using another method (retail key or MAK), you need to convert it to KMS activation. For the information on how to do it, please read the following article from Microsoft: https://technet.microsoft.com/en-us/library/ff793406.aspx.
Multiple Activation Keys (MAK): If you are using MAK, do the following:
Click the Add button and type a valid key in the License key field.
In the Max. guests field, specify the key limit. The limit should be greater than or equal to the max guests in the template (which you set on the first page of the wizard)
Click OK.
Note: Parallels RAS does not keep the old MAK key in hosts if it was updated in the Parallels template properties.
The Advanced page has different properties for different types of Providers. The differences are described below.
Cluster Shared Volume (CSV), Network share: These two options appear if you are using Hyper-V Failover Cluster. They allow you to select a type of storage where hosts will be created. Select a desired option and then click the [...] button next to the edit field. Depending on the option selected, specify a Cluster Shared Volume or network folder. Note that a shared folder must be compatible with SMB 3.0. Please also note that the same credentials used to register Microsoft Hyper-V host as a Provider will be used to access the SMB file share for Hosts.
Please also read the important note below.
Note: To use this functionality, you need to set SMB constrained delegation (resource-based) using Windows PowerShell. Important: Windows Server 2012 forest functional level is required.
On a server running Windows 2012 R2 and above install the Active Directory PowerShell module using Powershell. Note that you don’t need the module on a Hyper-V host or SMB file servers.
Run the following cmdlet:
Install-WindowsFeature RSAT-AD-PowerShell
Delegate SMB delegation on a file server (cluster) for every node of Hyper-V cluster. For example if you are running a four-node Hyper-V cluster and you use a Scale-Out File Server cluster FS-CL01 as virtual machine storage:
Enable-SmbDelegation –SmbServer FS-CL01 –SmbClient Hyperv-01
Enable-SmbDelegation –SmbServer FS-CL01 –SmbClient Hyperv-02
Enable-SmbDelegation –SmbServer FS-CL01 –SmbClient Hyperv-03
Enable-SmbDelegation –SmbServer FS-CL01 –SmbClient Hyperv-04
Mandatory: verify applied settings (the actual delegations) as follows:
Get-SmbDelegation –SmbServer FS-CL01
Folder: This option is available if you are using Hyper-V, VMware vCenter, or Nutanix AHV (AOS). It specifies a folder where hosts will be created.
Use a separate network interface for LAN access: This option is available if you are using any of the Hyper-V or VMware providers. Specifies the network interface that will be used by Connection Broker and Provider Agent. This is useful if a template has several network interfaces and you want to use a specific one for communication with Parallels RAS. If you select this option, you also need to specify the following:
Address: IP address of the network interface.
Subnet mask: Subnet mask of the IP address.
Resource pool: Specifies a VMware resource pool.
Physical Host: Available for VMware vCenter. Specifies a physical host where hosts will be created.
Enable hardware acceleration graphics licensing support: This option is available if you are using VMware vCenter or VMware ESXi. Select it to allow vGPU-enabled hosts to unregister their vGPU licenses from the license server on shutdown.
Resource group: Select an Azure resource group where the cloned VM will be created. Note that this must be a group to which you granted permissions to the Microsoft Entra ID app. For details, see Create a Microsoft Entra ID application.
Size: Select a VM size to be used for cloned VMs.
OS disk type: Select a disk type to be used for cloned VMs.
Once the agent is installed, and the Status field on the Check Agent wizard page confirms this, click Next. The VM will now be powered off (wait for the power off operation to finish). Once the VM is powered off, the template configuration Step begins.
The subsequent wizard pages are described in the sections that follow this one. Please note that many of the wizard pages inherit the information from Site default settings, but you can override it if needed. To specify your own settings, clear the Inherit default settings option. To see and edit default settings, click the Edit Defaults link. For more information, see Site defaults.
Use the Preparation page to select and configure an image preparation tool.
Note: When you specify properties on this page, they are remembered in your personal configuration file on the local machine. The next time you decide to create another template, the fields here will be populated automatically using the values you used the last time.
First, select whether you want to use RASprep or Sysprep. The advantages of using RASprep and the differences between the two tools are described below.
RASprep is the Parallels RAS tool for preparing Windows in a VM after cloning it from a base image. RASprep performs the following tasks during the initial startup of each new VM:
Creates a new computer account in Active Directory for each host.
Gives the host a new name.
Joins the host to the Active Directory domain.
Compared to Sysprep, RASprep works much faster because it modifies a lower number of configurable parameters and requires less reboots.
Note: Due to API limitations, RASprep cannot be used on Windows Server 2008 machines.
The following table lists the main differences between RASprep and Sysprep:
Operation | RASprep | Sysprep |
---|---|---|
After selecting the preparation tool, specify the following options:
Computer name: A name pattern that should be used to assign a computer name. For example, Windows10-RAS-%ID%.
Owner name: Owner name (optional).
Organization: Organization name (optional).
Administrative password: Local Windows administrator password.
Join domain: A domain name for the VM to join.
Administrator: Domain account.
Password: Domain account password.
Target OU: Full DN of an organizational unit. Click the [...] button to browse Active Directory and select an OU.
Delete local accounts
No
Yes
Generate new SIDs
No
Yes
Unjoin the parent host from the domain
No
Yes
Change computer name
Yes
Yes
Join the new instance to the domain
Yes
Yes
Language, regional settings, date and time customization
No
Yes
Number of reboots
1
2 (seal, mini-setup and domain joining)
The Optimization page allows you to specify settings that will be used to optimize Windows running in hosts for best performance in a Parallels RAS environment. You can select Windows components, services, and other options that will be disabled, removed, or optimized to ensure a more efficient, streamlined, and improved delivery of virtual apps and desktops. For the complete description, please see Optimization.
After reading the Optimization section mentioned above, please also note the following VDI specifics:
Optimization is disabled by default when you create a new template. If you plan to enable it, you should make a backup (create a full clone) of the source host before doing so. You can also create a template with optimization disabled, then create a snapshot, and only then enable optimization. Making a backup is a good idea because once optimization settings are applied, they cannot be rolled back.
To enable optimization for an existing template, the template must be in maintenance. A template in the "Ready" state has the Optimization tab disabled.
When optimization is enabled or modified for an existing template and the template exits the maintenance mode, the administrator will be asked to recreate existing hosts, so that optimization settings are applied to them. Note that hosts must be recreated (now or later) to receive optimization settings.
When optimization is applied to a template, its status changes to Optimization in progress (among others). At this stage, you can select the template in the list and click Tasks > Stop optimization, which will cancel the operation.
This page is used to configure template distribution to multiple Microsoft Hyper-V hosts. Note that this page will only appear if the source VM is a Microsoft Hyper-V machine. For the description of this feature and requirements, please see .
To configure template distribution:
Select the Enable multi-provider template distribution option.
In the Available list, select one or more providers and click Add (or Add all to add all available providers). Note that only providers of the same type and subtype as the source VM are displayed in this list.
In the Number of providers for concurrent distribution field, specify the number of concurrent distribution operations. The template is distributed to target hosts using Hyper-V Live Migration, which first exports the virtual machine to a file and then moves it to the destination host. For each host in the Target list, a Live Migration operation must be performed. The number specified here dictates how many network copy operations should be started at the same time. The larger the number, the more network resources will be required. Note that virtual machine exports (the first step of Live Migration) are always done one VM at a time, so the number you specify here affect only the copy operations.
Note: The Enable multi-provider template distribution setting cannot be modified (selected or cleared) once the template is created. If later you decide to turn it on or off (enable or disable the feature), you will need to delete and re-recreate the entire template. You can, however, add or remove Providers to/from an existing template.
When done, click Next to proceed to the next wizard page.
This section describes the host naming pattern that you specify on the Properties page of the template creation wizard.
Each time a new host is created, a name for it is generated automatically based on the pattern that you specify in the Host name field. The complete name format is as follows:
<prefix>%ID:N:S%<ending>
where:
<prefix> is an alphanumeric string that must begin with a letter (not a digit).
%ID:N:S% is a numeric pattern used to automatically generate a unique host ID. See the Numeric pattern subsection below.
<ending> is a free-form alphanumeric string.
The numeric pattern in the VM name has the following format:
%ID:N:S%
The elements in the pattern above are:
ID — Must be included as is.
N — The number of digits to use, including leading zeros. Use "0" if you don't want to insert leading zeros.
S — The starting number. This element is optional. If you don't include it, the number will start with 1.
%ID:3%
— This pattern will generate 3 digit numbers with leading zeros, such as "001", "002", "003"...."998", "999".
%ID:3:200%
— This example will generate 3 digit numbers starting from 200, such as "200", "201", "202"..."998", "999".
VDI-R1-%ID:3:100%
— This is a complete name with an alphanumeric prefix and a numeric pattern. The resulting names will look like the following: "VDI-R1-100", "VDI-R1-101", etc.
When crating a name pattern, follow the rules listed below. If any of these rules are not observed, you will see an error message and will have to correct it:
The name must start with a letter. A digit is not allowed as the first character.
The alphanumeric part of a name can contain letters, digits, and a hyphen. No other characters are allowed.
The total length of the name must not exceed 15 characters.
The name can include just one numerical pattern (%ID:N:S%
), which must be placed at the end or in the middle of the name.
The pattern that you specify is also validated against the value of the Maximum hosts field. If the pattern doesn't cover the maximum number of hosts, you will get an error and will have to correct it.
When you delete a host, the number that was assigned to it becomes unused. The next host that is created will be given this number, so there are no gaps in numbering.
On the Summary page, review the template summary information. You can click the Back button to correct some of the information if needed.
Finally, click Finish to create the template and close the wizard.