Set-RASGatewayDefaultSettings

NAME

SYNOPSIS

Modifies default settings used to configure a RAS Secure Gateway.

SYNTAX

Set-RASGatewayDefaultSettings [-AllowAppsInNewTab <bool>] [-AllowClipboard <bool>] [-AllowCORS <bool>] [-AllowedDomainsForCORS <List`1>] [-AllowEmbed <bool>] [-AllowFileTransfer <bool>] [-AllowLaunchMethod <bool>] [-AlternateNLBHost <string>] [-AlternateNLBPort <uint>] [-AutoCertificate <SwitchParameter>] [-AutoPreferredBroker <SwitchParameter>] [-Broadcast <bool>] [-BrowserCacheTimeInMonths <uint>] [-CertificateId <uint>] [-CertificateObj <Certificate>] [-Cipher <string>] [-CipherPreference <bool>] [-CipherStrength {Low | Medium | High | Custom}] [-ClientDetectionTimeout <uint>] [-ClientIPPDetectionServiceURL <string>] [-ClipboardDirection {None | ClientToServer | ServerToClient | Bidirectional}] [-DetectClientMode {Automatic | Manual}] [-DisableWyseCertWarn <bool>] [-DOSPro <bool>] [-EnableAlternateNLBHost <bool>] [-EnableAlternateNLBPort <bool>] [-EnableDeviceManagerPort <bool>] [-EnableGatewayPort <bool>] [-EnableHSTS <bool>] [-EnableRDP <bool>] [-EnableRDPUDP <bool>] [-EnableSSL <bool>] [-EnableUserPortal <bool>] [-EnableWyseSupport <bool>] [-FileTransferMode {Disabled | ClientToServer | ServerToClient | Bidirectional}] [-ForwardGatewayServers <string>] [-ForwardHttpServers <string>] [-GatewayPort <uint>] [-HSTSIncludeSubdomains <bool>] [-HSTSMaxAge <uint>] [-HSTSPreload <bool>] [-LaunchMethod {ParallelsClientAndWebClient | ParallelsClientAndHTML5 | ParallelsClient | WebClient | HTML5}] [-MACAllowExcept <string[]>] [-MACAllowOnly <string[]>] [-MinSSLVersion {TLSv1 | TLSv1_1 | TLSv1_2 | TLSv1_3}] [-Mode {Normal | Forwarding}] [-NormalModeForwarding <bool>] [-OnlyAllowAcmeHttp <bool>] [-PreferredBrokerId <uint>] [-PreferredBrokerObj <Broker>] [-RDPPort <uint>] [-SecurityMode {AllowAllExcept | AllowOnly}] [-SiteId <uint>] [-SSLPort <uint>] [-UseClientIPDetectionService <bool>] [-UsePreWin2000LoginFormat <bool>] [-UserPortalPort <uint>] [-UseSecureWebCookie <bool>] [-WebCookie <string>] [-WebRequestsURL <string>] [<CommonParameters>]

DESCRIPTION

Modifies default settings used to configure a RAS Secure Gateway. For each setting, the cmdlet has a corresponding input parameter. To modify a setting, specify a matching parameter and its value. Default settings are defined on a site level and are applied to a Gateway when it is initially added to the site. To retrieve the current defaults settings, use the Get-RASGatewayDefaultSettings cmdlet.

PARAMETERS

-SiteId <uint> Site ID for which to modify the default Gateway settings.

        Required?                    false

        Position?                    named

        Default value                0

        Accept pipeline input?       false

        Accept wildcard characters?  false

-Mode <GatewayMode> Gateway Mode. Accepted values: Normal, Forwarding. Possible values: Normal, Forwarding

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-NormalModeForwarding <bool> Forward requests to HTTP server.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-ForwardGatewayServers <string> One or multiple (separated by comma) Forwarding Gateway Servers. E.g. localhost:80, web1

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AutoPreferredBroker <SwitchParameter> Set preferred Broker Automatically.

        Required?                    false

        Position?                    named

        Default value                False

        Accept pipeline input?       false

        Accept wildcard characters?  false

-PreferredBrokerObj <Broker> The preferred Connection Broker. To obtain an object of type Broker representing the Preferred Connection Broker, use the Get-RASBroker cmdlet.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-PreferredBrokerId <uint> The preferred Connection Broker ID.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-ForwardHttpServers <string> One or multiple (separated by comma) Forwarding HTTP Servers. E.g. localhost:81, web1

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-EnableGatewayPort <bool> Enable or disable a custom RAS Secure Gateway port. To specify a custom port, set this parameter to True and use the GatewayPort parameter to specify the port number.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-GatewayPort <uint> A custom Gateway port number. For this port to take effect, the EnableGatewayPort parameters must be set to $True.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-OnlyAllowAcmeHttp <bool> Whether to ignore all incoming requests except for Acme ones received on 'GatewayPort'

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-EnableRDP <bool> Enable or disable a custom RDP port. To specify a custom port number, use the RDPPort parameter.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-RDPPort <uint> A custom RDP port number. For this port to take effect, the EnableRDPPort parameter must be set to True.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-Broadcast <bool> Enable or disable the 'Broadcast RAS Secure Gateway Address' option.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-EnableRDPUDP <bool> Enable or disable the 'RDP UDP Data Tunneling' option.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-EnableDeviceManagerPort <bool> Enable or disable the 'Device Manager Port' option.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-DOSPro <bool> Enable or disable the 'RDP DOS Attack Filter' option.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-EnableSSL <bool> Enable or disable SSL on the port specified in the SSLPort parameter.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-SSLPort <uint> SSL port number. To enable the port, set the EnableSSL port parameter to True.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-MinSSLVersion <AcceptedSSLVersion> Minimum SSL version. Accepted values: TLSv1_3 (TLS v1.3 only, strong), TLSv1_2 (TLS v1.2 - TLS v1.3), TLSv1_1 (TLS v1.1 - TLS v1.3), TLSv1 (TLS v1 - TLS v1.3). Possible values: TLSv1, TLSv1_1, TLSv1_2, TLSv1_3

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-CipherStrength <CipherStrength> Cipher strength. Accepted values: Low, Medium, High, Custom. Possible values: Low, Medium, High, Custom

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-Cipher <string> Cipher string.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-CipherPreference <bool> Enable or disable Use ciphers according to server preference.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AutoCertificate <SwitchParameter> Set Certificate Automatically.

        Required?                    false

        Position?                    named

        Default value                False

        Accept pipeline input?       false

        Accept wildcard characters?  false

-CertificateObj <Certificate> The Certificate. To obtain an object of type Certificate, use the Get-Certificate cmdlet.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-CertificateId <uint> The Certificate ID.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-EnableHSTS <bool> Enable or disable HSTS. To specify a custom HSTS Age, set this parameter to True and use the HSTSMaxAge parameter to specify the HSTS maximum age.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-HSTSMaxAge <uint> Specifies the HSTS maximum age.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-HSTSIncludeSubdomains <bool> Enable or disable the HSTS sub-domains.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-HSTSPreload <bool> Enable or disable the HSTS preload.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-EnableUserPortal <bool> Enable or disable User Portal connectivity on the Gateway.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-UserPortalPort <uint> A custom User Portal port number.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-LaunchMethod <LaunchMethod> Launch method. Possible values: ParallelsClientAndWebClient, ParallelsClientAndHTML5, ParallelsClient, WebClient, HTML5

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AllowLaunchMethod <bool> Allow users to select a resource launch method.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AllowAppsInNewTab <bool> Allow users to start applications in a new browser tab.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-UsePreWin2000LoginFormat <bool> Enable or disable the 'Use Pre Windows 2000 Login Format' option.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AllowEmbed <bool> Allow embedding of Web Client into other web pages.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AllowFileTransfer <bool> Deprecated: use FileTransferMode instead. Enable or disable the 'Allow file transfer' option.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-FileTransferMode <FileTransferControlMode> File Transfer option. Possible values are: 0 (Disabled), 1 (client to Server only), 2 {Server To Client only), 3 (Bidirectional). Possible values: Disabled, ClientToServer, ServerToClient, Bidirectional

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AllowClipboard <bool> Enable or disable the 'Allow Clipboard' option.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-ClipboardDirection <ClipboardDirections> State of clipboard direction. Possible values: None, ClientToServer, ServerToClient, Bidirectional

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AllowCORS <bool> Allow cross-origin resource sharing.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AllowedDomainsForCORS <List`1> Allowed domains for cross-origin resource sharing.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-UseClientIPDetectionService <bool> Use Client IP detection service.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-ClientIPPDetectionServiceURL <string> Client IP detection service URL.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-DetectClientMode <DetectClientMode> Detection mode. Automatically on sign in Manually on user prompt (Default) Possible values: Automatic, Manual

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-ClientDetectionTimeout <uint> Client detection timeout in seconds.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-BrowserCacheTimeInMonths <uint> How long should the browser preserve the cache (in months).

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-EnableAlternateNLBHost <bool> Enable or disable Alternate NLB host name specified in the EnableAlternateNLBHost parameter.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AlternateNLBHost <string> Alternate NLB host name. To enable the host name, set the EnableAlternateNLBHost port parameter to True.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-EnableAlternateNLBPort <bool> Enable or disable Alternate NLB on the port specified in the AlternateNLBPort parameter.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-AlternateNLBPort <uint> Alternate NLB port number. To enable the port, set the EnableAlternateNLBPort port parameter to True.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-EnableWyseSupport <bool> Enable or disable Wyse ThinOS support.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-DisableWyseCertWarn <bool> Enable or disable the warning if server certificate is not verified.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-SecurityMode <GatewaySecurityMode> Security Mode. Accepted values: AllowAllExcept, AllowOnly. Possible values: AllowAllExcept, AllowOnly

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-MACAllowExcept <string[]> Specifies the Security 'MAC Allow Except' MAC addresses.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-MACAllowOnly <string[]> Specifies the Security 'MAC Allow Only' MAC addresses.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-WebRequestsURL <string> Set a URL for Web requests. This is the URL that will open when a user enters the IP address of the RAS Secure Gateway server in a web browser. For the URL to work, the gateway mode must be set to Normal.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-WebCookie <string> Set the Web Cookie Name used by RAS.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

-UseSecureWebCookie <bool> Enable or disable the addition of the secure attribute to the cookie to the Web Cookie.

        Required?                    false

        Position?                    named

        Default value

        Accept pipeline input?       false

        Accept wildcard characters?  false

        This cmdlet supports the common parameters: Verbose, Debug,

        ErrorAction, ErrorVariable, WarningAction, WarningVariable,

        OutBuffer, PipelineVariable, and OutVariable. For more information, see

        about_CommonParameters .

INPUTS

-none-

OUTPUTS

-none-

EXAMPLES

---------- EXAMPLE 1 ---------- Set-RASGatewayDefaultSettings -SiteId 2 -GatewayPort 90 Sets the default value of the GatewayPort property for the specified site.

PreviousSet-RASGateway NextSet-RASHALB

Last updated 8 months ago